Like us on Facebook!
Gear Star American Performance Transmission, Transmissions - Automobile, Akron, OH
gearstar performance transmissions
1-330-434-5216

700-R4 - Level 4 Transmission with Torque Converter

Horse Power: 650
(Up to 600 ft-lbs Torque)
Converter: 10in Custom Built Lock-Up with Billet Cover
Stall: 2800-4000

Heavy Duty Reinforced Transmission Case
Master Overhaul Kit with Raybestos Generation II Racing Frictions
and Hardened Kolene Steels
Wide Carbon Fiber 2-4 Band
Heavy Duty Band Anchor
2 Transgo Recalibration Shift Kit with Shift Command
New Valve Body Separator Plate
Original Equipment Style Filter
4th Gear Super Hold Servo
New Torrington Bearings
Bushing Kit
Thrust Washer Kit
New 29-Element Dual Cage Sprag
New Low-Reverse Spring & Roller
High Capacity 10-Vane Pump Assembly with
New Rotor and Slide
Hardened Stator Shaft
New Vanes and Hardened Rings
0.500 Boost Valve
Updated Pressure Regulator Valve
Reinforced Input Drum
Extra Capacity 3-4 Clutch Drum Assembly with High-Rev Spring Kit
Heavy Duty Hardened Rollerized Sun Shell
Five-Pinion Heavy Duty Steel Planetary Gear Sets
Fully Rollerized Planetary Gear Set
New Original Equipment Steel Transmission Pan
New Speedometer Drive Gear
New Speedometer Driven Gear
30,000 GVW Hayden Transmission Cooler
Vacuum Lock-Up System
Installation Kit: Universal Fill Tube and Stick, Universal Throttle Valve Pressure Cable, Universal Transmission Mount, Universal Converter Cover

CORE CHARGE: $100.00

AVAILABLE AT ADDITIONAL COST
*30,000 GVW Hayden Cooler with Integrated Fan - Call for Pricing
*Geometry Kit for Holley or Edelbrock Carburetors - Call for Pricing
*Heavy Duty Close Quarter Case - Call for Pricing
*Deep Cast Aluminum Transmission Pan - Call for Pricing
*Lokar Installation Kit: Lokar Flexible Tube and Stick, Lokar Throttle Valve Pressure Cable and Carburetor Bracket - Call for Pricing


Full Manual Forward Pattern Valve Body Available – Please Call For Details
If you are ordering for a corvette application, please call us at
(330) 434-5216 – this is a unit specific application and
will require either a core charge or your unit.

All transmissions are custom built by 1 of 5 master techs from start to finish and DYNO tested with converter the equivalent of 100 miles to insure that transmission and converter package are in perfect operating condition before they leave our facility.

All sales are final. No returns or refunds.


Gear Ratio's
1st 3.06
2nd 1.62
3rd 1.00
4th 0.70

Dimensions
Measurements are taken from mounting surface where trans meets engine block to the tip of the tailshaft
Total Length: 31" 2WD Only
Distance to trans mount center: 22 3/4"

Price: $3895